Z70 v2
78
Indicator Type
[
Icon
/ Text
]: allows selecting whether the status indicator which each
value
is represented will be text type or icon type.
As many drop-down lists of icons or
text boxes will be displayed as states have been enabled in the previous parameter.
2.2.2.1.3.6
Two Scene
Analogously to the 1-button scene control, 2-button scene controls allows sending the KNX bus
a scene value, however in this case there will be two buttons in the box, each of which can be
configured independently.
Figure 72
2-Button Control
– Two Scenes
Top / Bottom Scene
[
1
…64
]
:
value of the scene that will be sent to the bus after
pressing on the top and bottom button.
➢
Action
[
Run
/ Run and Save
]: sets whether the device will only send orders to
execute specified scene (after a short press) or if will be possible to send orders to
save the scene (after a long press).
➢
Object to Use
[
General Scene Object
/ Individual Box Scene Object
]: specifies
whether the scene value will be sent through the object "
[General] Scenes: Send
"
or through the individual object for each: "
[Ci] Top Scene: Send
"
and/or “
[Ci]
Bottom Scene: Send
”.
