Z70 v2
84
2.2.2.1.4.2
Mode
This function turns the box into a climate mode control.
When this type of mode control is assigned to the box, two communication objects are enabled:
the “
[Ci] (Climate) Mode Control
”
control object, and the “
[Ci] (Climate) Mode Indicator
”
status object. Depending on the mode selected by the user, the control object will be sent to the
bus a certain value, after which the box will display the icon that corresponds to the new mode.
Two mode control types are possible: Heat / Cool control type and the Extended (HVAC) control
type.
Mode Type:
➢
[
Heat/Cool
]: Selecting this type of mode control turns the box into a 2-button control
one of which will activate the Heat mode, while the other one will activate the Cool
mode. A centered indicator will reflect, as an icon, the currently active mode.
Figure 78
Climate Control - Heat/Cool Mode
When the user activates the Cool mode, the device will send the value “0” through
the control object, while on the activation of the Heat mode the value “1” will be sent.
Moreover, the box will automatically commute between one icon and the other every
time the user executes a mode change, and also on the reception of a new value
(from the bus) through the status object.
➢
[
Extended
]: Selecting this type of mode control turns the box into a 2-button control,
which permit sequentially commuting among the different HVAC climate modes. A
centred indicator will reflect, as an icon, the currently active mode.
Up to five modes [
Auto / Heat / Cool / Fan / Dry
] are available, each of which can
be enabled/disabled in ETS by means of the proper checkbox, which permits setting
