Z70 v2
32
2.1.10
IP CONFIGURATION
Z70 v2 is able to communicate with other external (GetFace IP) or internal (Z70 v2 or Z41 COM)
units via Ethernet connection. Such communications will require correct configuration of certain
general IP parameters.
ETS PARAMETERISATION
Figure 18.
IP Configuration
Device Description:
assigns a name to the device.
IP Address Assignment
[
DHCP
/ Static
]: selects whether the IP is set by the DHCP
protocol or is defined in a static way.
My ID
[
MY_ID
]: identification code of the Z70 v2 required to communicate with other
devices.
Note: the characters included in this field must comply RFC 2396 standard.
IP Address
[
192.168.1.101
]: is used to uniquely identify the Z70 v2 for VoIP functionality.
This is the IP address that will be indicated on the outdoor unit (GetFace IP) and on a
contact on another screen to establish an internal call.
Note:
it is recommended to set this IP address out of the range of addresses assigned
by the home router to prevent possible conflicts with the IP address visible to the internet.
Subnet Mask
[
255.255.255.0
]: must match the mask of the network to which Z70 v2
belongs.
Specify Gateway
[
disabled
/enabled
]: when enabled permits introduce a
gateway
[
192.168.1.1
]. It is required when Z70 v2 is in a different network from the other units
which it will communicate.
