Z70 v2
18
ETS PARAMETERISATION
Figure 7.
Locale
Main Locale
[
enabled
]
:
read-only parameter to make it evident that the main locale is
always enabled.
➢
Select Locale:
list of the available locales.
Locale X
[
disabled
/enabled
]: enables the additional locale X.
➢
Select Locale:
list of the available locales.
The language and locale are changed via the following communication objects:
1-byte object
“
[General] Localization - Select
”. To select
the locale and the language
from any of the configured in ETS.
➢
The expected values in this object are fixed, from 0 to 4. When one of these values
is received, the texts of the file
‘
text_
language-region
.xlf
’ corresponding to the
regional configuration associated with this value will be loaded.
➢
If the received value does not correspond to any enabled locale, the main locale
will be loaded.
Note
:
this object is only available if more than one locale is enabled in ETS.
4-bytes object
“
[General] Localization - Select
”
.
➢
The values expected by this object are four characters,
language-region
pair,
corresponding to ISO 639-1 and 3166-1 respectively.
➢
When a valid language-region code is received, the texts from the '
text_
language-
region
.xlf
' file and the indicated region will be loaded. In case there is not that file,
