background image

ZENN

iO

 

AVANCE

 

Y

 

TECNOLOGÍA

 

 

www.zennio.com

 

 

18 

2.2.1.6.

 

SCENE CONTROL 

Scenes or “lifestyles” 

consist of a synchronized activation of some 

devices in the domotic installation, so that different predefined 
atmospheres are generated. 

There is an only Communication Object associated with 

“Scenes”

. All 

the scenes will be always sent through the object 

“[GN] Scenes”

 

Before continuing with the parameterization of this type of control, a 
small introduction to the Communication Object 

“[GN] Scenes” 

is 

done next: 

 

The DPT (Datapoint Type) Scene Control is a one byte Object with the 
following format. 

 

 

 

C

     0 = Activate the scene corresponding the field Scene Number 

N  

                   1 = Learn the scene corresponding the field Scene Number 

 

    Reserved field with value “0 

 

 

N  

    Scene Number Range [0…..63] 

 

Note I

If C=0, the DPT valid range is [0….63], whereas if C=1, the DPT 

valid range is [128…..191]

 

Note II

:  

 

Activate Scene 1 

Æ

  

DPT=0

 

Activate Scene 2 

Æ

  

DPT=1

 

 

Activate Scene 64 

Æ

  

DPT=63

 

 

 

Learn Scene 1 

Æ

 

 DPT=128

 

Learn Scene 2 

Æ

  

DPT=129

 

.. 

 

Содержание InZennio Z38i
























































Отзывы: