ZENN
iO
AVANCE
Y
TECNOLOGÍA
www.zennio.com
37
RESPONSE
Æ
Depending on the function parameterization, the value
sent to the BUS will be, “0”, “1” or an alternative switching between “0
and 1”
CYCLICAL RESPONSE SENDING
Æ
This parameter allows a user
to choose the cyclically data sent, “0”, “1” or both (if the option
“Always” is selected).
PERIOD:
Defines the elapsed time between two consecutive
sendings in the “Cyclical Sending”
SHUTTER CONTROL
This function results on sending 1 bit to the BUS in order to control
shutters.
RESPONSE
Æ
The corresponding Control Object may be used to:
Raise:
Raise the shutter. The BUS receives a “0”.
Lower:
Lower the shutter. The BUS receives a “1”.
Raise/Lower Switching:
Alternative switching between the Pull
Up/Down orders (to manage the shutter with an only input).
Stop/Pull Up Step:
Stops the shutter. When talking about shutters
with lamellas, this mode allows the user to control them; this
parameter moves lamellas a pull up step. The BUS receives a “0”.
Stop/Pull Down Step:
Stops the shutter; when talking about
shutters with lamellas, this mode allows the user to control them;
this parameter moves lamellas a pull down step. The BUS receives
a “1”.
Stop/Step Switching:
Stops the shutter; when talking about
shutters with lamellas, this mode allows the user to control them;
this parameter alternatively switches the lamellas pull up and down
steps.
Note I: When no directional lamellas are present, any of the 3 last
options will “stop” the shutter.
Note II: Este último modo "parar persiana" incluye las 3 opciones de
paso arriba, paso abajo y paso conmutado para el control de lamas;
pero si la persiana no dispone de lamas orientables, cualquiera de las 3
opciones serviría para realizar la función parada de la persiana.
Note III: Si se elige la función “subir/bajar” para la pulsación corta, no
se podrá realizar la función “parar persiana” en cualquier punto del
recorrido con otra pulsación corta de la misma entrada.
