ZENN
iO
AVANCE
Y
TECNOLOGÍA
www.zennio.com
22
In this case, the Panel will not send any binary data to the BUS unless
the correct password is entered
ICON
Æ
An icon can be associated to the display box. (See Annexe
II).
INDICATOR
Æ
By activating this parameter, an status indicator will
be inserted between both buttons:
•
ON/OFF
•
0/1
2.2.1.12.
PRESENCE SIMULATION
This function is designed to simulate presence in a house, once the
devices on the KNX installation have been correctly parameterized,
two new
Communication Objects
become active:
¾
Presence Simulation (1 bit):
Enable/Disable the function
¾
Simulation Channel (1 bit):
Generate the ON/OFF
This function consists on the cyclical sending of
“0”
&
“1”
while
activated. A random semi-cycle duration is applied for the ON/OFF
within the parameterized limits.
Note: This simulation can be enabled / disabled through the
display or through an object; and once activated; this will only be
running during the parameterized time range.
STARTING TIME / FINISH TIME
Æ
This parameter adjusts the
time for the daily simulation to start/stop running (once enabled the
function).
¾
Max/Min ON/OFF time
: Users can adjust by parameter the
minimum and maximum ON/OFF time for the devices on the
installation.
2.2.2.
“SPECIFIC” PAGES
The InZennio Z38i has three specific pages to configure:
Available options are:
¾
SCENES (5 boxes available)
¾
SCHEDULE PROGRAMMING (4 boxes available)
