ZENN
iO
AVANCE
Y
TECNOLOGÍA
www.zennio.com
24
LINKED TO SCENES?
Æ
When this box is enabled, a user can
control Scenes by mean of a programming; the possible control
associations are:
•
Only for ON
•
Only for OFF
•
For both ON & OFF
¾
Scene Number OFF:
Scene number to execute when the OFF
programming set by the user is fulfilled.
¾
Scene Number ON:
Scene number to execute when the ON
programming set by the user is fulfilled.
Note I: These associations are solved through internal links;
this means it is not necessary any kind of addressing process to
carry out Schedule Programming associated to Clime and/or
Scenes.
Figure 3.1
Note: We just mentioned that the schedule programming is associated with the
On/Off of the installed devices. Figure 3.1 and Figure 3.2 show how the
THERMOSTAT and the A/C systems are affected when a “1” or a “0” is sent
through the corresponding channel.
Sending a “0” through the Channel “X” does not affect the thermostat modes.
PROG
“ON”
THERMOSTAT
On/Off
Æ
“1”
A/C
Scenes
On/Off
Æ
“1”
ON
Æ
“Scene
Nº”
OFF
Æ
“N/A”
Both
Æ
“Scene
Nº”
Comfort
Æ
“1”
Out
Æ
“1”
Night
Æ
“1”
