68
ME-004_v01
ATTENTION! The producer cannot be held responsible for any damages that occur
due to improper installation or misuse of the oven.
After connecting the oven, you should:
1
Put the oven into the unit paying attention not to block the cable or place it on the top
of the oven.
2
Secure the oven to the casing by four screws provided in the set driver into the holes
which can be seen when the door is open.
3
Check whether the walls of the oven are separated from the casing and if there is at
least 2mm from the elements of the units situated in the vicinity of the oven.
Power supply
The person responsible for the connection of the power supply should check whether:
The voltage of the power supply corresponds to the requirements given on the rating
●
plate.
Wiring corresponds to maximum power given on the rating plate.
●
The connection diagram is proper to what is shown on the
fi
gure below.
●
The connection is grounded according to the appropriate regulations.
●
The connection is done by using a multi-pole switch appropriate to the load. The
●
distance between the contacts must be at least 3 mm, to allow disconnection in case
of danger or during light bulb cleaning/changing. In any case the grounding cable
should not pass through the switch.
After connecting the power, all electric elements should be checked to determine whether
they are properly working.
Using the oven
SETTING THE TIME
After plugging the oven in, you will see 12:00 and a light
fl
ashing over the symbol
.
By pushing buttons
and
you may set the right time. After the time is saved, the
light will automatically go off.
OVERRIDE
After time setting, the oven is ready to use. You should select oven temperature and
mode.
In order to turn the oven off, set the controls to
.
PROGRAMMING THE CLOCK MODE
Warning mode:
the mode products a warning sound in a given time.
Grilling time:
the mode enables programming the oven to work for a given time, after
which it will automatically turn itself off.
Grilling time end:
the mode enables you to establish a precise time, when the oven will
automatically turn itself off.
Duration time and automatic shutdown:
this mode combines work duration with exact
time when the oven will automatically turn itself off. You can de
fi
ne automatically the
beginning and end of work of the oven.
Clock lamp:
clock lamp may be turned off, when the oven is not used.
WARNING MODES
1
Press the MODE button until the light above the
symbol starts
fl
ashing.
2
Select the hour, when the sound signal will be heard by pressing the
and
buttons.
3
The light will stay turned on, indicating the alarm has been programmed.
4
At the end of programmed time, an alarm will be set off and a light will
fl
ash.
5
Push any button to turn the alarm off, and return the oven to displaying the current
time.
GRILLING TIME
1
Push the MODE button until the indicator above the
symbol starts
fl
ashing.
2
Select duration time by pushing the
and
buttons.
3
The
fl
ashing indicator will light up, informing you the oven will turn off automatically.
4
The clock will return to showing the current time.
5
Select oven temperature and mode.
6
When the given time passes, the oven will turn off, alarm signal will go off, and the
indicator will start
fl
ashing.
7
Push any button to turn the alarm off. The oven will turn on again.
8
In order to turn off the oven, place the settings in the
position.
GRILLING TIME END
1
Push the MODE button until the indicator above the
symbol starts
fl
ashing.
2
Select the time, when the oven needs to start working by pressing the
and
buttons.
3
The
fl
ashing indicator will light up, informing you the oven will turn off automatically.
4
The clock will return to showing the current time.
5
Select oven temperature and mode.
6
When the given time passes, the oven will turn off, alarm signal will go off, and the
indicator will start
fl
ashing.
7
Push any button to turn the alarm off. The oven will turn on again.
8
In order to turn off the oven, place the settings in the
position.
DURATION TIME AND AUTOMATIC SHUTDOWN
1
Push the MODE button until the indicator above the
symbol starts
fl
ashing.
2
Select duration time by pushing the
and
buttons.
3
You will see next that the indicator is no longer
fl
ashing, and is lit up.
4
Push the MODE button until the indicator above the
symbol starts
fl
ashing.
5
Select the time, when the oven needs to start working by pressing the
and
buttons.
6
You will see next that the indicator is no longer
fl
ashing, and is lit up.
7
Select oven mode and temperature.
8
The oven will remain turned on and the indicators above the
and
symbols
will be lit.
The oven has been successfully programmed.
9
When the time comes, the oven will start working for the programmed amount of time.
3