31
MM1200-001_v01
Do not obstruct the ventilation openings in the housing
●
during operation.
Do not place the appliance on a soft surface.
●
Do not immerse the appliance drive unit in water and
●
do not wash it under running water.
Do not wash accessories when mounted on the
●
drive unit. Do not use abrasive cleaning agents such
as emulsions, creams, pastes, etc. for cleaning the
appliance housing. They may remove graphical
symbols, such as scales, markings, warning signs, etc.
Hint
Information on the product and hints on its use
Unplug the appliance after you finish using it. Put away
●
the cord, pushing it gently through the opening and
place the plug in the compartment.
If the appliance cannot be switched on, bring it to
●
a service centre.
Separate the meat to be minced from bones, sinews,
●
gristles and veins.
Cut large portions of the product into smaller pieces
●
before mincing.
Do not grind dry poppy seed. The poppy seed must
●
be scalded and soaked for dozen or so hours before
mincing.
Use a soft brush for cleaning the metal parts.
●
Do not wash the metal parts in dishwashers. Abrasive
●
detergents used in dishwashers may cause the metal
parts to become dark. Wash them manually using
traditional washing-up liquids.
TYPES OF ZELMER MINCERS
The table below shows a range of accessories available for the mincers and covered by this user manual.
Type
Accessories
Mincer unit No. 8
Shredder
Juicer
Burr grinder
MM1200.80
●
●
●
●
MM1200.82
●
○
●
○
MM1200.83
●
●
●
○
MM1200.84
●
●
○
○
MM1200.88
●
○
○
○
●
– basic accessories,
○
– additional accessories available in shops
Technical data
The technical parameters are given on the rating plate of the
product.
Maximum time of non-stop operation:
10 minutes
An interval between repeated operation:
30 minutes
Noise level (L
WA
):
77 dB(A)
The appliance is built in insulation class II and does not
require earthing.
ZELMER mincers meet the requirements of the applicable
standards.
The appliance complies with the requirements of the
following directives:
Low Voltage Directive (LVD) – 2006/95/EC.
–
Electromagnetic Compatibility (EMC) – 2004/108/EC.
–
The product is marked with CE symbol on the rating plate.
Appliance description
The foodstuff mincer consists of:
1
Drive unit – each drive unit is designed to work with each
mincing unit and shredder manufactured by ZELMER.
There are ventilation openings in the rear cavity of the
MM1200 drive unit compartment.
Mincer unit consisting of:
2
Mincer body
3
Feed screw with attached coupling
4
Double-side cutter
5
Screen with 4 mm holes
6
Threaded ring
7
Tray
8
Pusher
A
