41
CK1020-002_v01
5
CK1020-002_v01
8
Anti-deposit filter
9
Cord storage
8
Filter
9
Ühendusjuhtme peidik
Preparing the kettle for operation
Before first use, wash the kettle inside (for
washing instructions see the “Cleaning and
maintenance” section), fill it with water up to the
“max” level, boil water four times (each time use
fresh water) and wash the kettle inside again.
Operating the kettle
1
Press the lid button
(5)
– the kettle lid will open.
2
Place the filter
(8)
in the kettle (if it is not in place).
3
Fill the kettle with the desired amount of water (the level
is visible on the indicator
(3)
).
Do not boil the water if it is below the minimum
level or beyond the maximum level on the indi-
cator (3).
4
Close the lid.
5
Place the kettle on the base
(4)
.
6
Plug the kettle to a socket provided with an earth pin.
7
Turn the kettle on by pressing the switch
(6)
– the power
indicator light will come on.
8
After the water is boiled, the kettle will switch off auto-
matically, the lever switch will return to its starting position
and the power indicator will go off.
If you plan to use the kettle again soon, it is not necessary
to remove the plug from the mains.
Make sure that the maximum kettle capacity is
not exceeded when the kettle is filled with water.
In the event that an empty kettle is switched on,
it will be switched off automatically by a thermal
device. To switch on the kettle after it has cooled
down (about 15 min), remove it from the base, fill
with water, replace on the base and switch on by
pressing the switch (6). The cooling down of the
kettle can be accelerated by pouring cold water
into the kettle.
Cleaning and maintenance
Always allow the kettle to cool down com-
pletely before cleaning!
1
Unplug the kettle from the mains.
2
Remove the filter
(8)
and rinse it under running water.
3
Clean the outside surfaces with a soft damp cloth
and washing-up liquid.
Technical data
The technical parameters are given on the rating plate
of the product.
1.7 litre capacity.
The kettle is built in insulation class I and is equipped with
a power cord provided with a grounding wire and a ground-
ing plug.
The kettle meets the requirements of valid standards.
The appliance is compliant with the requirements of the fol-
lowing directives:
- Low Voltage Directive (LVD) – 2006/95/EC.
- Electromagnetic Compatibility (EMC) – 2004/108/EC.
The product is affixed with the CE mark on the rating plate.
Kettle elements
1
Spout
2
Kettle body
3
Water level indicator
4
360° swivel base
5
Lid release button
6
On/off switch (0-I with power indicator)
7
Handle
– steam might condense and appear on the exterior
of the kettle.
●
Do not place the kettle on or near hot objects.
●
Do not immerse the kettle or the power base in water
when filling or washing the electric kettle.
●
If water gets into any electric elements inside the kettle
or onto the base, carefully dry these elements before
plugging the kettle to the mains.
●
Do not operate the kettle when empty.
●
Do not use the kettle with the lid open – the automatic
shut off will not work then.
●
Do not use any abrasive cleaning agents – such
as emulsions, creams, pastes, etc. – for cleaning the
kettle body. They might remove graphic information
symbols, such as scales, marks, warning signs, etc.
●
The appliance is not intended to be operated by means
of an external timer or separate remote-control system.
TIP
Product information and tips on use
●
The appliance is intended for domestic use. In case it
is used for food business purposes, the warranty con-
ditions change.
●
Do not use the kettle without the filter.
A
B
C
6
CK1020-002_v01
In order to remove the build-up of hard water film from the
outside and inside walls of the kettle, wipe them with a damp
cloth and vinegar.
4
Rinse the kettle with fresh water.
Various black-coloured, rusty, milky, etc.
deposits may form inside the kettle and float
on the water. This is caused by minerals occur-
ring naturally in water (calcium, magnesium,
iron, etc.). Such discoloration is not caused by
faulty operation of the appliance and does not
affect its use. In case of substantial accumula-
tion of mineral deposits, proceed as described
in the “Descaling” section.
Descaling
In the event that scale builds up on the bottom of the kettle,
it needs to be removed. For this purpose use 6-10% vinegar
or citric acid.
●
Open the lid by pressing the lid release button
(5)
.
●
Add 0.5 l of vinegar or 40 g of citric acid and fill the kettle
with water up to the maximum level. Switch on the kettle.
●
Bring the mixture to boil and allow the kettle to stand for
30 minutes.
●
Empty the kettle and rinse it with fresh water.
●
Remove the filter
(8)
and rinse it under running water.
Replace the filter.
●
Fill the kettle with fresh water, boil the water and empty
the kettle.
●
If sediment is still visible in the kettle, remove it with
a sponge and rinse the kettle again. If unsuccessful,
repeat the descaling process.
The kettle should be descaled periodically
to avoid its possible damage.
Ecology – environment protection
Each user can protect the natural environment.
It is neither difficult nor expensive. In order to
do it: put the cardboard packing into recycling
paper container; put the polyethylene (PE)
bags into container for plastic.
When worn out, dispose the appliance to particular disposal
centre, because of the dangerous elements of this appli-
ance, which can be hazardous for natural environment.
Do not dispose into the domestic waste disposal!
The importer/manufacturer is not liable for any damages resulting
from improper use or handling of the appliance.
The importer/manufacturer reserves the right to modify the product
at any time and without prior notice in order to adjust it to valid law
regulations, norms, directives, or due to construction, trade, aesthetic
or other reasons.
Содержание CK1020
