Zelmer 686, Руководство пользователя

Страница: 53 / 60

53
Technical data
Technical parameters are given on the product’s data plate.
Allowed time of continuous work of the meat mincer
10 minutes
Required break before following use of the meat mincer 30 minutes
Noise of the meat mincer: Type 686 80 dB/A
Type 886 77 dB/A
Meat mincers type: 686 and 886 are built within the II insulation class, they do not require earthing.
ZELMER meat mincers meet the requirements of the following applicable standards.
The meat mincer complies with the requirements of the following directives:
−
Low voltage device (LVD) – 2006/95/EC
−
Electro-magnetic compatibility (EMC) – 2004/108/EC
The product has been marked with the CE mark on the data plate.
Description of the appliance
The meat mincer consists of:
−
Drive unit – each drive of the machine is adjusted to the
assembly of each of the mincing set and the shredder
produced by ZELMER. Within the back casing of the drive
unit in meat mincer 686, and in the case of meat mincer 886
the ventilation holes are placed within the storeroom in the
casing.
Pusher
Food tray
Grinding chamber
safety lock
On/Off switch
Power cord
Mincing
chamber
Coupling
Feed
screw
Cutter knife
4 mm screen
Ring collar
8 mm screen
Drive unit
head
−
Mincing set, which consists of:
−
mincing chamber,
−
feed screw with assembled coupling,
−
cutter knife,
−
screen with 4mm holes,
−
ring collar.
−
Food tray.
−
Pusher.
−
Equipment, which includes:
−
screen with 8 mm holes
−
sausage stuffer,
−
separator.
The meat mincer is equipped with mechanical protection, which secures the motor against any damage – teeth of the coupling break, when the meat
mincer is overloaded (f. ex. when bones have entered into the mincing chamber).