Zeiss VISUCAM C, Руководство пользователя

Страница: 19 / 68

Instrument Description
000000-1253-546 VISUCAM C 31.07.2003
17
Optional accessories
Printer
The printer is used to print the captured images. It is connected either to
a free USB port of the VISUCAM C (
4 , Fig. 4) or the conventional
parallel port LPT1.
Caution
For operation, observe the corresponding user’s manual provided by
the manufacturer.
Fixation device
The internal fixation device is located directly behind the aspherical
lens. The manipulator allows the fixation point to be moved freely in
this plane. By moving the fixation mark axially along the optical axis, an
ametropia of
±
5 D of the patient can be compensated. Every point of
the field of view is accessibly by moving the control handle.
•
To install the fixation device, unscrew the stopper and replace it by
the internal fixation device.
Demonstration eye with holder
The demonstration eye is designed for practising the operation of the
VISUCAM C.
When required, plug the holder with the demonstration eye into the
holes of the fastening pins (
3 , Fig. 2) at the headrest. By moving the
unit longitudinally, an ametropia of
±
5 D can be adjusted.
USB Flash Drive
The USB Flash Drive can be used for fast data transfer. It is connected to
a free USB interface of the VISUCAM C connector panel.
Note
The connecting cable to the USB Flash Drive may not be
unplugged and plugged when the system is being run up or
down or when the red LED on the USB Flash Drive is alight. The
instrument must be switched off when plugging or unplugging
the USB cable.
Fig. 8 Fixationseinrichtung