Zehnder Rittling 40019309, Руководство по эксплуатации

Страница: 43 / 149

80
40019121
Problem Diagnosis Procedure
The battery level indicator
on your remote control
is displayed. Batteries drained. Change batteries (see chapter 8.4 ).
No display.
The remote control is off. Long press on .
7KHEDFNOLJKWLQJRQWKH
remote control screen is off.
3UHVVDNH\WRWXUQLWRQDJDLQ
The remote control screen
is on standby.
3UHVVDNH\WRWXUQLWRQDJDLQ
7KHWLPHÀDVKHV
Time and date setting not
done. Set time and date (see chapter 4.1 ).
The screen on the remote
control displays the E2
error message. Indicates a problem with
the temperature sensor on
the appliance. Contact your installer.
The temperature setting
does not match the tem-
perature observed in the
room. There is a discrepancy in
the measurement made by
the temperature probe. Calibrate your remote control (see
chapter 5.5 ) to align the tempera-
ture measured in the room by the
appliance, and that measured by your
thermometer.
5HPRWHFRQWUROEURNHQ
Your appliance remains on
the last command received. • Reset the appliance by pressing
10 seconds on the LED. The LED
ÀDVKHVSLQNTXLFNO\WRFRQ¿UPWKH
reset.
• Your appliance is waiting to be
paired and to start heating again.
PILOT WIRE
Problem Diagnosis Procedure
The appliance no longer
replies to commands from
the pilot wire.
The pilot wire is not
connected correctly.
&KHFNWKHSLORWZLUHFRQQHFWLRQVHH
chapter 2.2 ).
&KHFNWKHUHPRWHFRQWUROLVLQ
Comfort mode.
Your remote control is no
longer set to accept pilot
wire operation. Activate the pilot wire function on
your remote control (see
chapter 5.3 ,
parameter 3).
The room temperature
does not match the
setpoint temperature on
the remote control. The pilot wire may be
connected to a program-
ming control unit which
WDNHVRYHUIURPWKHUHPRWH
control (e.g.: sending an
Eco mode order from the
control unit, while the
control is set on Comfort).
Deactivate the pilot ware in advanced
parameters (see
chapter 5.3 para-
meter 3) so that the remote control
continues to operate your appliance.
SDUDPHWHU
ÀDVKHVSLQNTXLFNO\ WRFRQ¿UPWKHUHVHW5HOHDVH
ÀDVKLQJVWDUWV
,IWKH/('UHWXUQVWRWKHVWHDG\SLQNVWDWHDIWHUWKHTXLFNÀDVKLQJVWDJHZKLOH\RXDUH
VWLOOSUHVVLQJRQLWWKHUHVHWKDVQRWWDNHQSODFH5HSHDWWKHSURFHGXUHIURPVWHS
81
02/2019
7KHEDFNOLJKWLQJRQWKH 3UHVVDNH\WRWXUQLWRQDJDLQ
3UHVVDNH\WRWXUQLWRQDJDLQ
7KHWLPHÀDVKHV
5HPRWHFRQWUROEURNHQ
ÀDVKHVSLQNTXLFNO\WRFRQ¿UPWKH
&KHFNWKHSLORWZLUHFRQQHFWLRQVHH
&KHFNWKHUHPRWHFRQWUROLVLQ
WDNHVRYHUIURPWKHUHPRWH
8.3 Complete reset
If your appliance freezes completely, or cannot be paired, the whole system has to be reset, then
pairing started again from the beginning (see chapter 4.1 ).
Reset remote control:
Reset the remote control from the advanced parameters (see chapter 5.3
SDUDPHWHU
Reset radiator / towel dryer:
1) Reset the appliance by pressing on the LED for 10 seconds .
The LED
ÀDVKHVSLQNTXLFNO\ WRFRQ¿UPWKHUHVHW5HOHDVH
immediately as soon as the fast
ÀDVKLQJVWDUWV
2) After releasing the LED, it returns to a steady pink .
3) Switch on the reset remote control and perform the pairing process (see chapter 4.1 ).
WARNING"
,IWKH/('UHWXUQVWRWKHVWHDG\SLQNVWDWHDIWHUWKHTXLFNÀDVKLQJVWDJHZKLOH\RXDUH
VWLOOSUHVVLQJRQLWWKHUHVHWKDVQRWWDNHQSODFH5HSHDWWKHSURFHGXUHIURPVWHS
If you still fail to pair your appliance, please contact your after sales service.