en27
ZP SPEEDCONTROL COMFORT
en
English
The ZP SPEEDCONTROL COMFORT has been pre-set by the factory and can be
directly used for many application cases!
As soon as you insert the power plug of the ZP SPEEDCONTROL COMFORT, it will
carry out an initialisation on its own. The following will appear briefl y on the display:
in order to switch to the standard display on the display:
The plant is now ready for operation with the green LED LINE illuminating.
6.2 Control panel of the ZP SPEEDCONTROL COMFORT
1.
Display for showing the operating condition
2.
Manual START/STOP button
3.
Access / Leave MENU
4.
UP / DOWN button
Increase or decrease of values in the menu when programming
5.
ENTER button
6.
LED displays:
LINE green:
Display illuminates when the device has been connected to the mains
FAILURE red:
In case of an error, the diode permanently illuminates or fl ashes
PUMP yellow:
Pump is in operation
AUTOMATIC green: Automatic operating mode
7.
ON/OFF AUTOMATIC button
Using this button, you can switch between the automatic or manual operating mode
9.
Closing permanent consumers.
Содержание ZP SPEEDCONTROL COMFORT
Страница 48: ...en48 ZP SPEEDCONTROL COMFORT en English...
