Zehnder Pumpen ZP SPEEDCONTROL COMFORT, Руководство по эксплуатации

Страница: 22 / 48

en22
Fuse of the pump
20 A
General
current supply
~1 230 V
Main fuse
20 A
ZP SPEEDCONTROL COMFORT en English
When connecting the pump, observe the connection diagram of the main circuit board (in
the bottom of the controller)!
Electrical connection must be carried out by a qualifi ed specialist taking into consideration
the appropriate local regulations. Prior to carrying out changes inside the housing, the
device must be disconnect from the mains. Wrong connections can lead to damages to
the electronic circuit. The manufacturer does not assume any responsibility for damages
that have occurred due to any wrong connection of the device.
!
For works inside the controller, it must always be disconnected from the mains. The
controller has capacitors which are carrying hazardous high voltages even after
disconnection from the mains. Therefore please wait for at least two minutes also after
switching off the mains voltage before starting work on the device.
5.5 Electrical connection of the controller ZP SPEEDCONTROL COMFORT