Chapter 2_______________________________________Zaxcom Digital Wireless System User’s Manual
40
Common Transmitter Independent Operations
Disable the IFB Receiver during Power-up
IFB MODE = OFF
Press and hold the
INC
and
MENU
keys during power-up.
To re-enable the appropriate
Display a Detailed Startup Sequence
Press and hold the
DEC
key during power-up.
Detailed Startup Sequence (without any card inserted)
LCD
SYNTH AB
LOW POWER MODE
IFB IS OFF 0
PCB REV B 0150
VER #-### (03)
***NO CARD***
NAME:
CCCCCCCC
NAME:
AUDIO CC
ZAXCOM V#-###
TRX900 SN:#####
LOW BATTERY
1.60V
581.6
RX
STOP
(Optional screen – only occurs if Low Power mode has been fully enabled.)
(
PCB REV B
– indicates the printed-circuit board is revision “B”.)
(
#–###
– indicates the version of the firmware loaded.)
(
CCCCCCCC
– indicates the “Name” entered in the Extended Menu. The
default is “
SN:
” followed by the unit serial number.)
(
#####
– indicates the transmitter’s serial number, hardcoded into the
printed-circuit board.)
(This screen appears when the battery has to be changed.)
(Be aware, if you get either alert, the unit may not go into Record mode.)