Zaxcom TRX900 Скачать руководство пользователя страница 64

Страница: 64 / 99

Chapter 6_______________________________________Zaxcom Digital Wireless System User’s Manual

Selecting the frequency

If interference is encountered, the range of the system is affected. If the range is less than 150 ft., go to a different

channel at least 30 MHz away from the interfered channel.

There are many devices that use the 2.4 GHz band. The IFB100 should be able to operate interference free while
other devices share the band. It is suggested that when operating in a new location that a range test be conducted

before the unit is used for a production.

IFB Input Mix page

IFB INPUT MIX:
LR MONO MIX

Page purpose:

This page controls the audio feed to the IFB transmitter.

Parameters:

RIGHT ONLY

– the IFB transmitter audio source is the right channel

LEFT ONLY

– the IFB transmitter audio source is the left channel

LR MONO MIX

– the IFB transmitter audio source is a 50/50 mix of both audio input channels

Lock page

LOCK 5

LOCKED 00:00:00:0

Page purpose:

This page enables a lock function to prevent accidentally changing settings.

This page has a five-second countdown. After the timer expires, the display indicates

LOCKED

Locking the controls prevents accidently changing settings. As a safety feature, while the unit is locked, only the
unlock combination is available.

If you scan past the

LOCK

display to the next menu page, the

LOCK

will not engage.

Unlocking the transmitter

Simultaneously press the

MENU

and

INC

keys. Once it is unlocked, the screen will return to the

Pacifier page

Cycling the power will also clear the lock.

IFB100 Extended Menu

EXTENDED MENU
PRESS UP TO EXIT

The IFB100 contains several menu pages that normally do not have to be changed on a regular basis. These items
are placed in the Extended Menu.

Entering the Extended Menu

Power down the IFB100.

Press and hold the

MENU

key while powering it up.

Exiting the Extended Menu

Cycle the power, or hold down the

MENU

key to get back to this page and press the

INC

key.

NOTE

: All changes are saved to Flash ROM as soon as they are committed.

Содержание TRX900




































































































Результаты поиска

Содержание TRX900

Отзывы:

Похожие инструкции для TRX900

Бренды по названию

Популярные бренды

Zaxcom TRX900, Руководство пользователя

Результаты поиска

Содержание TRX900

Отзывы:

Похожие инструкции для TRX900

Бренды по названию

Популярные бренды