Chapter 6_______________________________________Zaxcom Digital Wireless System User’s Manual
62
IFB100 Standard Menu
Pacifier page
2.403 ----
2.403 STOP
Page purpose:
When you power up the unit, this page appears and displays the following information:
•
Transmitter frequency,
•
Audio level meter,
•
Status of the IFB100 transport remote control.
NOTE:
For diagnostic purposes, you can press the
INC
or
DEC
key to read the Motherboard supply voltage.
Remotely Starting and Stopping the Transmitter Recorder
While in this page, pressing the
INC
or
DEC
key sends a Record or Stop command to all TRX9xx/ZFR1xx units
in the same group as the IFB100.
When setting the IFB input audio level, normal conversation should be around -20 dB.
Remote Audio Gain Change page
REMOTE GAIN
GROUP01 UNIT=ALL
Page purpose:
This page allows you to adjust the audio gain on the specified remote transmitter(s).
Pressing
INC
displays “
+
+
” and transmits a command to increase the gain setting, pressing
DEC
displays “
–
–
”
and transmits a command to decrease the gain setting. Monitor the audio coming from the TRX9xx unit being
adjusted to verify the gain setting change. The Remote Unit ID page can be set to ALL or a specific unit.
NOTE:
If the TRX9xx is not in range of the IFB or is on the fringe of coverage, the gain control command may
have to be repeated.
IMPORTANT:
Each time gain is increased or decreased, the level changes by 2 dB. The change
IS
noticeable if
it is done while talent is speaking. What until talent has stopped talking before changing the level.
Remote Unit ID page
REMOTE CONTROL
UNIT ID=ALL
Page purpose:
This page sets the unit you control when you use any of the remote control settings.
Parameters:
[
ALL
] / [value range:
0
to
200
, step:
1
]
Remote Audio Frequency Change page
REMOTE CH 512.0 *
UNIT ID=1 000
TX CH WARNING
UNIT ID = ALL
Page purpose:
This page sets the unit you control when you use any of the remote control settings.
Parameters:
[value range: (see
Table 1.3
), step: .
1
] The frequency range is based on the frequency range
selected in
TV Channel Minimum page
and
TV Channel Maximum page
.
