Zaxcom Digital Wireless System User’s Manual_______________________________________Chapter 5
51
Getting to know your RX4900 Diversity Receiver
1. 2. 3. 4. 5.
6. 7. 8. 9. 10. 11. 12. 13.
14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26.
1. Stereo Receiver #1
10. 12 VDC Power Connector
19. Receiver Power Switch
2. Stereo Receiver #2
11. Receiver #2 Left & Right Audio
20. Receiver #1 Monitor Switch
3. Common Controls
12. Receiver #1 Left & Right Audio
21. Receiver #2 Monitor Switch
4. Stereo Receiver #3
13. Receiver Left Antenna Loop Thru
22. Receiver #3 Monitor Switch
5. Stereo Receiver #4
14.
DEC
key
23. Receiver #4 Monitor Switch
6. Receiver Right Antenna Loop Thru
15.
INC
key
24. Mono/Stereo switch
7. Receiver #4 Left & Right Audio
16.
MENU
key
25. Monitor fader
8. Receiver #3 Left & Right Audio
17. LCD screen
26. ¼” monitor jack
9. RS-485 Loop Thru
18. Valid signal LED
Figure 5-2 RX4900 Front, Rear, Receiver & Monitor Controls Views
Left Right
Figure 5-3 RX4900 Interior – Mic/Line output level switches
IMPORTANT:
Be sure to match the output level of your RX4900 receivers with the appropriate input level of
downstream equipment. UP is Line-level, DOWN is Mic-level. They are located inside the case, near the
XLR-3M connector. One pair is next to each receiver. To access them, remove the screws on top and
bottom, on the left and right sides. The unit is normally sold with all outputs set to Line-level.
