Chapter 2_______________________________________Zaxcom Digital Wireless System User’s Manual
34
IMPORTANT:
This function will not work if you record audio and then delete the files. It only works if you
initialize the card, then delete the wrapper files and then record audio on it.
Timecode Jam Mode page
TC JAM MODE:
MANUAL (OFF)
Page purpose:
This page maintains how received timecode will be used.
Parameters:
•
AUTO-LOAD
– start and stop the transmitter’s recorder, based on the
Timecode Source page
selection:
o
If an IFB100 is being used - when the IFB100 timecode starts and stops.
o
If an STA100/STA150/TCA100 is being used and the timecode source is connected to it when the
timecode source starts and stops.
•
AUTO-JAM
– continuously jams timecode, based on the
Timecode Source page
selection.
•
MANUAL (OFF)
– jam timecode once, based on the
Timecode Source page
selection.
Timecode Source page
TC SOURCE:
IFB (RF)
Page purpose:
This page maintains the timecode source.
Parameters:
•
SIDE CONNECTOR
– Accept a timecode source connected to the side connector.
•
IFB (RF)
– Accept a timecode source connected to the IFB100.
•
AUDIO INPUT
– Accept a timecode source connected to the Audio Input connector.
Timecode Output Enable page
TIMECODE OUTPUT:
OFF
Page purpose:
This page enables/disables timecode output and specifies the output connector.
Parameters:
•
ON: OUTRIGHT
– Sends timecode to the timecode output connection on the STA100.
•
ON: OUTLEFT
– Sends timecode to the headphone output.
•
OFF
– Timecode is not output.
Remote Control Group ID page
REMOTE CONTROL
GROUP ID=1
Page purpose:
This page identifies which IFB100 can remotely control this transmitter.
Parameters:
[value range:
0
to
99
, step:
1
]
It is highly desirable to have all transmitters and recorders in a given group assigned to the same IFB100.
Remote Control Unit ID page
REMOTE CONTROL
UNIT ID=001
Page purpose:
This page maintains the number used to uniquely identify this transmitter.
