Zaxcom Digital Wireless System User’s Manual_______________________________________Chapter 1
11
Menu System
The user interface for each unit consists of a Liquid Crystal Display with 3 keys, as follows:
•
MENU
– Menu page/function select: press once to move to the next menu page.
•
INC
(up arrow)
– Increment the current parameter selected by the
MENU
key.
•
DEC
(down arrow) – Decrement the current parameter selected by the
MENU
key.
Each menu has several pages allowing you to change configuration settings. All of these settings are stored in Flash
ROM immediately after making the change.
Figure 1-1 TRX900 Front View
Media
Some of the units read from and/or record to a MiniSD card, which is inserted into the MiniSD media slot. All of
the transmitters use a MiniSD card to update the unit’s firmware. To be safe, you must use approved media:
Media
Manufacturer’s ID
Approved?
SanDisk & Transcend 4GB SDHC MiniSD
YES
ALL Dane-Elec
NO
SanDisk 2GB MiniSD (retail packaging)
SDSDM-2048-A10M
YES
SanDisk 2GB MiniSD (bulk packaging)
SDSDM-2048, Bulk
YES
ALL SanDisk MicroSD (with MiniSD adapter)
YES
ALL SanDisk Ultra
NO
ALL SanDisk Ultra II
NO
Transcend 2GB (x80) MiniSD
TS2GSDM80
YES
ALL Transcend (x45)
NO
Transcend 4GB MiniSD
TS4GSDM80
YES
Any brand that prints the info on a sticker applied to the chip
NO
Table 1-1 Approved vs. Unapproved Media
IMPORTANT:
To use any 4GB card, V5.53 or greater is required
If unapproved media is used, it can become jammed in the MiniSD socket and damage it.
CAUTION:
Damage resulting from using unapproved media is not covered by the warranty.
Do
not
use SanDisk Ultra II cards. Formatting one of them may make it unusable.
