Zaxcom Digital Wireless System User’s Manual______________________________________Chapter 12
95
Menu Sheet for RX900 (M/S) & RX4900
MENU SETTINGS
Standard Menu
i.
(Pacifier page)
(Displays: antenna being used, signal strength, audio level, transmitter limiter status, receiver
reception format, receiver battery capacity, transmitter recorder status and transmitter battery
capacity.)
ii.
c123.4
▄
▄
: ________ (Audio Receiver Frequency Select page)
(value range 30 MHz in 518 to 872 MHz, step: 100 KHz)
iii.
Scan1234
: ________ (Audio Receiver Frequency Scan page)
Start a Scan:
Press the
UP
key
Accept the Frequency:
Press the
DOWN
key
Discard the Frequency:
Press the
MENU
key
iv.
Tone
: ______ (Test Tone page)
[Off] / [0dB] / [+20]
Extended Menu
– to reach these, turn off the RX, then hold the
MENU
key down while powering up
i.
Lite
: ________ (Backlight On/Off page)
([Off] / [On])
ii.
Psave
: ________ (Power Saver Enable page)
([Off] / [On])
iii.
Form
: ________ (Audio Reception Format page)
([0=US] / [1=EU] / [2=ST])
iv.
ID0
: ________ (Security Code Part 0 page)
(value range: 000 to FFF, step: 1, unless necessary, use 000)
v.
ID1
: ________ (Security Code Part 1 page)
(value range: 000 to FFF, step: 1, unless necessary, use 000)
vi.
RxNum
: ________ (RS-485 Unit Identifier page)
(value range: 0 to 99, step: 1)
vii.
Baud
: ________ (RS-485 Communication Speed page)
([192] / [384])
viii.
p# nnn.n
: ________ (Preset Frequency pages {# = 0 to 9})
(value range 30 MHz in 518 to 872 MHz, step: 100 KHz)
