6
11.
HEADPHONE Knob / BACK Knob
•
Press it to back out of a menu to the previous menu.
•
Turn it to adjust headphone volume.
•
Press and hold will enter user inputted data.
12.
Star key
•
From the any
Home page
, it advances to the next
Home page
.
•
In the
Bus Routing
matrix
and
Card Mix
matrix if pressed it you will add phase reverse to your cross point
options.
•
In the
Fader Assign
matrix if pressed it will add trim to your cross point options.
•
If pressed and held while powering-up, Maxx will look for new software and start the update process.
13.
Fader 1 (4 total)
Each of four faders can be assigned to any channel or combination of channels, or act as a hardware trim
knob.
14.
Auto-Trim
TM
LED (4 total)
Indicates which fader is active for AutoTrim
TM
.
15.
Pre Fader Listen key
•
Press to listen to Pre Fader audio from the corresponding fader.
•
When in setup mode press to access the AES input setup menu for the corresponding AES inputs.
•
Pressing from the Meta Data menu or Track Naming menu will open the list of presets.
16.
SLT key
•
Press and hold it to activate the Slate mic.
17.
Power Key
•
A quick press will power up Maxx.
•
Press and hold for 3 seconds to power down Maxx. Release the key when the countdown reaches 1.
•
When Auto-Pan is ON the power key will change the panning for the active channel.
18.
MENU knob / SHIFT key
•
From the
Home page
press it to access the
Main Menu page
.
NOTE:
From the
AES Virtual Fader
meter screen or from the
ENG
meter screen you have to push and hold
to access the
Main Menu
.
•
Turn it to scroll through the items in a menu.
•
Press to select a menu item.
SHORTCUT:
While scrolling through a parameter with a long list, pressing the
MENU
knob while turning it will
speed up the scroll speed by 10 times.
