MAIN MENU Recording Setup / Mirror Folder
19
Mirror Settings Menu
This menu controls the copying of the Primary (MARF) audio to the Mirror CF folder.
The mirror audio is recorded as FAT32 files and is fully compatible with all Mac and PC platforms and is generally used as a
deliverable format to Post
.
Mirror Mode
•
OFF:
Maxx will not mirror any files.
•
ON:
Maxx will only start to mirror once the unit stop recording.
•
CONTINUOUS:
When Maxx is recording, the audio is copied to the mirror folder as is written to the primary
folder. Depending on the track count, the mirror card may lag behind a bit. Not to worry, after you go into Stop
mode, the mirror card will catch up.
Folder to Mirror
This menu specifies which folder on the primary media is to be mirrored.
•
If you want to
CONTINIOUS MIRROR
this folder needs to match the primary folder.
•
If you want to re-mirror a folder, this folder needs to match the primary folder you want to copy.
Start Segment
This will set the first segment that Maxx will mirror or re-mirror. When you are recording the start segment will
automatically increment with each file on the primary card.
End Segment
This will set the last segment that Maxx will Mirror or Re-mirror.
Green checkmark indicates
which folder will be
mirrored to.
NOTE:
If you are finding that mirroring is lagging you may be using too much of Maxx’s processing power
elsewhere. Many times there are items that are on that are on are not needed. These items can often be shut off to
conserve processing power and speed up the mirroring process. You can check to see that some of these items are
not unnecessarily on:
Bus Assignments Cross Points, Compressor Enables (input, output and card), High Pass Filters and Notch Filters.
