MAIN MENU Recording Setup
14
Record Card / Mirror Menu
This menu controls your primary recording and mirroring functions.
Mirror Mode
•
OFF:
Maxx will not mirror any files.
•
ON:
Maxx will only start to mirror once the unit stop recording.
•
CONTINUOUS:
When Maxx is recording, the audio is copied to the mirror folder as is written to the primary
folder. Depending on the track count, the mirror card may lag behind a bit. Not to worry, after you go into Stop
mode, the mirror card will catch up.
Write Sound Report
When you select this, Maxx will create a Sound Report and write it on the Mirror CF card file. The sound report
contains the Meta Data information for what was recorded.
IMPORTANT:
Mirror mode must be turned off to write a sound report.
NOTE:
If you are finding that mirroring is lagging you may be using too much of Maxx’s processing power
elsewhere. Many times there are items that are on that are on are not needed. These items can often be shut off
to conserve processing power and speed up the mirroring process. You can check to see that some of these items
are not unnecessarily on:
Bus Assignments Cross Points, Compressor Enables (input, output and card), High Pass Filters and Notch Filters.
