MAXX OPERATIONS Tone Setup
51
Setting Up and Engaging Tone
Assigning Tone to Output Busses
To assign tone to an output bus, press the
Bus
key and go to the
OUTPUT BUS ASSGN
matrix to select which output
bus will receive tone.
NOTE
: Only the busses with tone routed to it will output the slate tone when the Visual Timecode Slate tone is
activated
Assigning Tone to Card Tracks
To assign tone to card tracks, press the
Bus
key and go to the
TONE ENABLE
matrix to select which card tracks will
receive tone.
Adjusting Tone
Tone level and frequency can be adjusted in the
ENG SETUP
menu.
Engaging Tone
To toggle tone generation on / off, press and hold the
TONE
key on the face of Maxx.
Shows that Output Busses 1, 2 will
output Tone when Tone is engaged.
Shows that Card
Tracks 1 and 2 will
record Tone when
Tone is engaged.
Adjusts Tone Frequency
Adjusts Tone Level
