MAXX OPERATIONS Pre Fader Listen
49
Headphone Setup
Setting up your Headphone
There are 10 individual Headphone matrices available to store a monitor configuration consisting of any combination of
the following:
•
Card tracks (CARD)
•
Output Buses (OUT)
•
Camera Returns (RETURN)
To set up your headphone selects:
1.
To access the headphone setup matrix - simultaneously press
MENU
knob and
HEADPHONE
knob.
2.
While in the matrix, scroll the
MENU
knob to highlight the cross-point you want to choose.
(
L
selections are sent to the Left ear and
R
selections are sent to the Right ear)
3.
Press the
MENU
knob to put an
X
in the matrix.
4.
Select the
E
to enable that setup to be active when toggling through while listening.
5.
Press the
Headphone
knob to advance to the next matrix.
6.
To exit, press and hold the
HEADPHONE
knob.
7.
You can also add a custom name to each setup. Go to the
ENG Setup page
and select
MONITOR NAMES
Headphone matrix setup to decode MS stereo:
The following is the proper setting for M-S headphone decoding. This example uses card track 1 as the Mid and
track 2 for the side:
Check
the
E
nable box to include
this monitor configuration while
cycling through the HP
L
eft Ear
R
ight Ear
NOTE:
To add the optional phase invert - press the
STAR
key. Then by pressing the
MENU
knob, you
will be able to cycle through the selections with phase invert.
Power cycling the unit will reset it to NO INVERSION mode but keep your phase invert choice.
