MAIN MENU Mode Menu
27
Prerecord
This allows you to have Maxx buffer the audio in a prerecord buffer. You can choose to buffer up to 5 seconds of audio.
From the point the Maxx is powered up, it is always processing data, and any sound coming in from any input is always
being processed. When pre-record time is enabled, the signal is held in a buffer until you press the
REC
key.
At that time, all stored audio in the buffer is included the current take with the correct time code.
The pre-record buffer is dumped after any of the following settings are changed:
•
Sample-rate, Time code, User-bits, Frame- Rate, Track count
NOTE:
Prerecord is limited on sample rates of 88200, 96000 or 192000. The prerecord is limited to 2 seconds
with the exception of recording more than two tracks at 192K - then prerecord will be limited to 1 second.
NOTE:
Running prerecord doesn’t use any additional battery power.
AutoTrim
TM
AutoTrim
TM
is a feature that makes the
MENU
knob act an individual trim knob for all you inputs. When AutoTrim
TM
is
turned on and you adjust a fader the blue LED next to that fader will illuminate indicating the input associated with
that channel will be trimmed when you rotate the
MENU
knob. When you adjust another fader, the trim function will
move to that input.
AutoPan
AutoPan is a feature that causes the
Power Key
act an individual pan knob. When AutoPan is turned on in the mode
menu and you adjust a fader the blue LED next to that fader will illuminate indicating the input associated with that
channel will be panned when you the
Power Key
is pressed. AutoPan is active from any meter screen.
When pressing the
Power Key
the panning for the illuminated channel will cycle from Left to Center to Right to Blank -
unless “Prevent Empty Pan” is turned ON then the blank option will not be cycled through.
As you AutoPan the headphone display will temporally show which input is panned to which position.
To AutoPan inputs 5 and 6 you need to be in the ENG meter screen and have VFade mode set to ON. Then when the
input trim meter is visable for that input then the Power Key will pan that input.
When AutoPan is activated the headphone display will temporally show which input is panned to which position.
Analog input 1 panned Left, Center, Right
Trim Level Indicator
Input being controlled
Trim Meter
