MAIN MENU Recording Setup / Mirror Folder
20
File Type
This menu sets the type of file Maxx will mirror.
•
BWAV MONO
•
BWAV POLY
A
BWAV MONO
file is 1 file per track. So if you record 1 track only, 1 file will represent that "take" from the time
you press record to the time you press stop. If you were to record 2 tracks for that same take, the Maxx will
produce 2 files, one representing track 1 and the other representing track 2.
A
BWAV POLY
file creates one file for that take, even if the take was recorded on multiple tracks. With POLY files
if a take is only 1 track the file would be 1 track. If the take was 2 tracks, it would still be one file with both tracks.
This is often referred to as being "2 tracks wide". Similarly, if 8 tracks were recorded it would still be only one file,
8 tracks wide.
File Resolution
This menu sets the bit depth that Maxx will mirror the files as.
File Name
This menu sets the way individual files are named.
•
Z001001
– is the default way where the file name consists of the Folder Name (Z001 or whatever name you
create) followed by the Segment Number (001).
•
1 T2 Z001
– creates a file name in the format of “
Scene
Take
Folder Name
SegmentNumber
”.
For example if you record Scene is “1”, Take “2” in folder “Z001” and the segment number is “2”, the file name is
“1_T2_Z0012.WAV”.
If you change the Folder Name, “Z001” will be replaced with whatever you have named that folder.
IMPORTANT:
Be careful not to create any Scene and Take text with characters other than letters or numbers
with the second file naming option
Mirror Options
This setting allows Maxx to stay in mirror mode after it has been powered off.
•
OFF
– Any time Maxx is powered up
Mirror Mode
will default to
OFF
.
•
ON
– Maxx will remember the
Mirror Mode
after it is powered up. So if you had Maxx set to Continuous Mirror
it will go to that setting after it powers up.
