Zap ZAPVAN SHUTTLE 2010, Руководство владельца/оператора

Страница: 21 / 58

2010
Owner and Operator’s Manual
20
Introduction of Devices and Control Mechanism
Fasten the safety belt
The two-point safety belt is mounted on the
double-seat of mid row.
Insert the dead bolt into the belt fastener and a
“clicking” sound indicates the safety belt is buckled.
Adjust the safety belt
Determine if the metal shackle is in correct angle
and then lengthen or shorten the belt to tighten
or loosen it.
Loose the safety belt
With one hand holding the dead bolt, use the
other hand to press the red button on the belt
fastener, then the dead bolt will be unlocked from
the safety belt.
WARNING!
The shoulder belt should be fastened across
the chest and shoulder diagonally (never
fasten it near the neck or to the face) but
do not let it slide down to the arm. The
waist belt should be fastened above thighs
and under the pelvis (never fasten it around
the abdomen). Belt fit should be proper as
over-tightness could be uincomforttable and
too loose can greatly diminish protective
performance.
Lying down is prohibited when fastening the
safety belt as it cannot protect passenger if
an accident occurs.
Each safety belt assembly is for one
passenger only, It is very dangerous for
passengers to hold a child on his/her legs.
An approved child seat should always be
used for child passengers.
Protect the safety belt from contamination
by contact with chemicals (especially the
electrolyte)
The mesh belt should only be cleaned with
mild soap and clean water. If the mesh belt
is worn, contaminated or damaged, please
replace with a new one.
Replace all used safety belts after an
accident, even if the damage is minor.
In order to protect safety belts from
loosening, do not change the safety belt
equipment or add non factiory-standard
accessories.
do not fasten safety belt across front shirt
pockets containing sharp objects.