Zap ZAPVAN SHUTTLE 2010, Руководство владельца/оператора

Страница: 16 / 58

2010
Owner and Operator’s Manual
15
Introduction of Devices and Control Mechanism
5. Multi-functional display
1. Screen
2. Display mode Selection button
3. Charge indicator /failure light
Screen
After briefly displaying electric power status, the
display automatically shifts to what was selected
last time.
Format and content of the display: Electric power:
two digits, for example: 08 means 80% of the
remainder electric power.
Power battery voltage: two U, for example:
75U means that current power battery voltage is
75 volts.
Power battery current: two A, for example:
135A means that the on-line power battery
discharge current is 135 ampere.
Auxiliary battery voltage: two digits + P + one
digit, for example: 13P5 means that Auxiliary
battery voltage is 13.5 volts at present
Electric power combination battery: Two digits
from 01 to 10 without units ,where 10 means the
electric power remaining is 100% while 01 means
10% is remaining.
Assistant battery warning: two P+ and the
unit is volts.
Display of failure code: When there is a vehicle
malfunction, the failure code display will emit
three warning beeps, and then display partial
failure information such as E-XX.
When there is tow or more concurrent types
of warnings, the multifunction display will emit a
continuous warning sound alternately with the
display code.
Code Definition
E-02 IGBT malfunction
E-03 motor over-current
E-04 control circuit under voltage
E-05 Temperature of radiator over 75℃
E-06 battery under voltage
E-07 overspeed
E-08 overload of temperature sensitive relay
E-09 * logical check of switch
E10 pedal brake warning
E-11 contactor problems
E-12 ** contactor failure
E-13 battery over voltage
E-14 parking brake warning
The specific explanation of partial failure code:
E-09*: Logical checking of switch: If shift “R” and
shift “F” have the same signal at the same time
due to the failure of direction select switch
during driving, the electric control system will
output nothing and export the failure code on
multifunction display. Turn the ignition switch to
“OFF” position and check the direction select
switch and the connecting circuit, and then restart
the vehicle .The failure disappears.