Zap ZAPVAN SHUTTLE 2010, Руководство владельца/оператора

Страница: 19 / 58

2010
Owner and Operator’s Manual
18
Introduction of Devices and Control Mechanism
3. Seats
Front seats
The angle adjuster, mounted on the outer side of
the seats, is used for adjusting the seat-back angle.
After lifting up the adjuster handle, push the seat-
back backward until the suitable position obtained
and then release the handle.
The method of moving the seat forward or
backward is as the arrows show below. To move
forward or backward lift the adjusting handle up
under the seat and then release it. If the motor
needs maintenance, please lift the entire seat up.
1. Lift up the angle adjuster handle as per below
picture to fold seats forward.
2. Draw the seat buckle up as the arrow in the
above picture to unfasten the shackle from hook.
3. Turn the seat over.
Mid-row seats
There are two seats in the mid row. The use
methods are as below:
1. Adjustment of the seat-back.
After lifting up the angle adjuster handle, push the
seat-back backward until it is in a suitable position
and then release the handle to adjust the seat-back.
2. Folding the seat down
Lift up the angle adjuster handle on the outer
side of the seats. Then loosen the rear anchor
butterfly bolt or pull the locking handle when
seatback contacts the cushion. After this, you can
fold the seat down.
3. Adjustment of headrest
Loosen the buckle under headrest and adjust the