Downloaded from www.vandenborre.be
A
Change of the type of
gas
Adjustment of the ad-
justment screw
From natural gas to liq-
uid gas
Fully tighten the adjust-
ment screw in.
From liquid gas to natu-
ral gas
Release the adjustment
screw approximately
3/4 of a turn.
3. Attach the oven control knob.
4. Light the oven burner. Refer to "Gas oven cooking:
Ignition of the gas oven burner".
5. Set the oven control knob to maximum and let the
oven heat for a minimum of 10 minutes.
6. Turn the oven control knob from maximum to mini-
mum.
Control the flame. If the flame goes out, do the procedure
from point 1 to point 6 again. There must be a small regu-
lar flame on the oven burner crown.
The manufacturer declines liability if you do not obey
these safety measures.
Environment concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please contact
your local council, your household waste disposal service
or the shop where you purchased the product.
Packaging material
The packaging material is environmentally-friendly
and recyclable. Plastic parts are marked with international
abbreviations such as PE, PS, etc. Dispose of the packag-
ing material in the containers provided for this purpose at
your local waste management facility.
32