Yolico YD3000N Series, Инструкция по эксплуатации

Страница: 46 / 139

5 . 1Initialize Mode Constants 5 . 1Initialize Mode Constants
A
SettingRange SettingRange
C h i n e s e
Function Function
Description of choice Description of choice
Used to select the language displayed on the Digital Operator
SettingRange SettingRange
Monitoring only (Displays only Operation mode and Initialize
mode)
Used to select user constant
Quick-Start : Q
Basic : B
Basic : A
4
Used to set the constant access level (set/read. )
Description of choice Description of choice
SettingRange SettingRange
V/f control without pulse generator
V/f control with PG feedback
Open-loop vector control
Flux vector control
Function Function
Description of choice Description of choice
Used to select the control method for the Inverter
Use constant select one of the four control methods.
This user constant is not returned to the factory setting
when constants are initialized. It must be manuallyreset
to the factory setting.
SettingRange SettingRange
No initializing
Initializes using the User constants
Initializes using a two-wiresequence. (Initializes to
thefactory setting.)
Initializes using a three-wire sequence .
Function Function
Function Function
Used to initialize the constants using the specified method.
Description of choice Description of choice
Example of Wiring for 2-wire Sequential Operation
1
Forward Run/Stop
Reverse Run/Sto p
Sequential input common
Example of Wiring for 2-wire Sequential Operation
Example of Wiring for 3-wire Sequential Operation
The default settings of the multi-function inputs are different
from the default settings of the 2-wire
sequence .
Stop switch (NC
)
Run switch (NO )
Run command
(Operates when the run switch is closed.)
Stop command
Stops when the stop switch is open.)
Forward/Reverse run command
Multi-function input 3)
Sequential input common
SettingRange SettingRange
Example of Wiring for 3-wire Sequential Operation
Function Function
SettingRange SettingRange
Password input when a password has been set in A1-05. This
function write-protects some constants of the Initialize mode.
Used to set a four digit number as the password.
Function Function
Description of choice Description of choice
Use constants A1-04 and A1-05 to write-protect the initialize-
mode user constants.User constants A1-01 through A1-03 and
A2-01 through A2-32 can be displayed but not changed ifthe
contents of A1-04 and A1-05 are not the same.To write-protec
t the initialize-mode user constants, set the password in A1-05
after inputting thedesiredvalues in A1-01 through A1-03
and A2-01 through A2-32. User constant A1-05 can be
displayedby displaying A1-04 and pressing the Menu Key
while pressing the Reset Key. (A1-05 can’t be displayed
with
the usual Key sequences.)It will be possible to change the i
nitialize-mode user constants again when the same password
is writtento A1-04 and A1-05.
Refer to the operation of an example page Refer to the operation of an example page
Use constant A1-00 to select the language displayed by the
Inverter. A value of 0 sets English and a value of 1 sets
Japanese.This user constant is not returned to the factory
setting when constants are initialized. It must be manually
reset to the factory setting.
Use constant A1-01 to select the user constant access level. This
level determines which user constantscan be changed and displayed.
The user constants that can be displayed and changed also depend
upon the control method being used.
This function initializes the user constants to values that
have been recorded as user settings.To record the user
settings, change the user constants to the desired values
and then set user constant o2-03(User constant initial
value) to 1. Once user settings are recorded, the o2-03
value will be automaticallyreset to 0. (The 1110 function
will be disabled when user constant o2-03 is set to 0.)
Is a registered trademark of yolico
YD3000N
نوﯾﺳﺎﻣوﺗا ﯽﺗﻌﻧﺻ
ﮏﯾرﺗﮑﻟاوﺑار
قرﺑ
و