YOKOGAWA ZR22S, Руководство пользователя

Страница: 154 / 206

<10. Other Functions>
10-10
10.4.5 Default Setting
When the analyzer is delivered, or if data are initialized, the blow back settings are by default, as
shown in Table 10.4.
Table 10.4 Blow back Default Setting
Item Default setting
Mode No function (“invalid”)
Hold time 10 minutes, 00 seconds
Blow back time 10 minutes, 00 seconds
Interval 30 days, 00 hours
Start date 01/ 01/00
Start time 0:00
10.5 Parameter Initialization
Parameter settings can be initialized to the factory default settings. Initialization can be done
for all parameters or for individual parameters. The parameters that can be initialized and their
defaults are listed in Table 10.5.
To initialize the set data, follow these steps:
(1) On the Basic panel display, touch the [Setup] key to display the Execution/Setup display.
(2) Select “Commissioning”, next “Others” then “Defaults”. A display like Figure 10.11. appears.
(3) Select the desired item to be initialized then a display like Figure 10.12 appears.
Select “Defaults start” then initialization starts.
Display

Calibration

Blow back

mA-outputs

Alarms

Contacts

Others

All data
Enter
Defaults
F10-11E.ai
Enter
Defaults start

Cancel
Defaults
Display
F10-12E.ai
Figure 10.11 Defaults Display Figure 10.12 Initialization Start Display
CAUTION
• Do not turn off the power during initialization. Otherwise, initialization will not be performed
properly.
IM 11M13A01-02E