YOKOGAWA ZR22S, Руководство пользователя

Страница: 133 / 206

<8. Detailed Data Setting>
8-21
8.6.5 Setting Passwords
Unauthorized access to lower level menu displays from the Execution/Setup display can be
protected by passwords. You can set separate passwords for Calibration, Blow back, and
Maintenance and for Commissioning
Proceed as follows:
1) From the Basic panel display touch the [Setup] key, and the Execution/Setup display
appears.
2) Select the “Commissioning” , and the Commissioning display appears.
3) Select the “Others” then the “Passwords”. The display shown in Figure 8.22 appears.
First set the password for Calibration, Blow back, and Maintenance.
4) Select “Calibration, Blow back, and Maintenance”.
5) A text entry display appears. Enter password as up to 8 alphanumeric characters.
6) You can enter a password for Commissioning by the same procedure.
7) Record the passwords and look after them carefully.
Enter
Calibration,Blow back
and Maintenance:

Commissioning:
Passwords
F08-22E.ai
Figure 8.22 Passwords Display
<Default setting>
The passwords are not set as shipped from factory. If you reset initialize the parameters, and
password settings are deleted.
If you forget a password, select “Commissioning” in the Execution/Setup display, and enter
“MOON”. By doing so, you can enter the Commissioning display only. Then display the
Passwords and verify the set passwords.
IM 11M13A01-02E