YOKOGAWA ZR22S, Руководство пользователя

Страница: 126 / 206

<8. Detailed Data Setting>
8-14
8.6 Other Settings
8.6.1 Setting the Date-and-Time
The following describes how to set the date-and-time. Automatic calibration or blow back works
following this setting.
Proceed as follows:
1) If you touch the [Setup] key in the Basic panel display, the Execution/Setup display appears.
2) Select the “Commissioning” and the Commissioning display appears.
3) Select the “Others” and the display of Fig 8.12 appears.
4) Select the “Clock” and the display of Fig 8.13 appears.
5) Select the “Set date” and the numerical entry display appears. To enter June 21. 2004 ,
enter 210604. Touch the [Enter] key and you revert to the display of Fig 8.13.
6) Select the “Set time”. Enter the time in 24-hour format. To set 2:30 pm, enter 1430 on the
numerical display and touch enter. Touch the [Enter] key, the clock starts from 00 seconds..
Clock

Averaging

Fuel setup

Purging

Unit setup

Passwords

Defaults Enter
Others
F08-12E.ai
Enter
Set date: 1 3 / 0 7 / 0 0

Set time: 1 4 : 3 9
1 3 J ul. 2 0 0 0
1 4 : 3 9 : 5 5
Clock
F08-13E.ai
Figure 8.12 Other Settings Figure 8.13 Clock Display
8.6.2 Setting Periods over which Average Values Are
Calculated and Periods over which Maximum and
Minimum Values Are Monitored
The equipment enables the display of oxygen concentration average values and maximum and
minimum values under measurement (see Section 10.1, later in this manual).
The following section describes how to set the periods over which oxygen concentration average
values are calculated and maximum and minimum values are monitored.
Procedure
1) From the Basic panel display touch [Setup] key, and the Execution/Setup display appears.
2) Select the “Commissioning” and the Commissioning display appears.
3) Select the “Others” then Averaging. The display of Figure 8.14 appears.
4) Select the “Set period over which average is calculated” and numerical entry display
appears. To set 3 hours, enter 003. Entry range is 1 to 255 hours.
5) Select the “Set period over which maximum and minimum is stored” and numerical entry
display appears. To set 48 hours, enter 048. Entry range is 1 to 255 hours.
IM 11M13A01-02E