YOKOGAWA ZR22S, Руководство пользователя

Страница: 105 / 206

<7. Startup>
7-5
7.9 Setting Display Item
This section briefly describes the display item settings shown in Figure 7.9, “Basic Panel Display.”
F07-10E.ai
Tag:
21.0
%O
2
17.43mA -Output1
17.43mA -Output2
Primary value
Secondary value
Tertiary value
Figure 7.10 Basic Panel Display
(1) Press the [Setup] key in the Basic panel display to display the Execution/Setup display.
Then select the “Maintenance” in the Execution/Setup display.
(2) Select the “Display setup” in the Maintenance panel display (Figure 7.11).
The Display setup display (Figure 7.12) then appears.
(3) In the above Display setup display, select the “Display item”. The Display item display
(Figure 7.13) then appears. From this display, select the “Primary value” and press the
[Enter] key to display the “Display item” selection display (Figure 7.14).
(4) Select the Secondary and Tertiary values in the same manner as in the steps above.
(5) Consult Table 7.1, Display Items, enabling the selection of display items in individual display
areas.
Enter
Display setup

Calibration setup

Blow back setup

mA-output loop check

Contact check
Maintenance
F07-11E.ai
Enter
Display item

Trend graph

Auto return time: 0min

Language: English
Display setup
F07-12E.ai
Figure 7.11 “Maintenance” Display Figure 7.12 Display Setup
Enter
Primary value:
Oxygen

Secondary value:
mA-output1

Tertiary value:
mA-output2

Tag name:
Display item
F07-13E.ai
Primary value:
Oxygen

Secondary value:
mA-output1

Tertiary value:
mA-output2

Tag name:
Enter
Oxygen
Item of output1 damping
Item of output2 damping
Display item
F07-14E.ai
Figure 7.13 “Display Item” Display Figure 7.14 Display Item Selection
IM 11M13A01-02E