YOKOGAWA YPP6060, Инструкция по эксплуатации, Страница: 69 / 104

Model YPP6060 Dual-Input Process Meter Instruction Manual
69
Display Parameter Action/Setting
Calib
Calibrate Calibrate 4-20 mA output (internal reference
source used for scaling the output)
4 nmA
4 mA output Enter mA output value read by milliamp
meter with at least 0.001 mA resolution
20 nmA 20 mA output Enter mA output value read by milliamp
meter with at least 0.001 mA resolution
User User I/O Assign function keys and digital I/O
F1 F1 function key
Assign F1 function key
F2
F2 function key Assign F2 function key
F3 F3 function key Assign F3 function key
F4
F4 function key Assign F4 function key (digital input)
dI I
Digital input 1 Assign digital input 1 – 8, if expansion
modules are connected
dO 1
Digital output 1 Assign digital output 1 – 8, if expansion
modules are connected
ICal Internal
calibration Enter internal calibration (used for
recalibrating the meter with a calibrated
signal source)
Ch-A Channel A Perform calibration on channel A
Ch-b
Channel B Perform calibration on channel B
C CAL Current
calibration Calibrate 4-20 mA current input (internal
reference source used for scaling the input)
C lo
Current low Calibrate low current input (e.g. 4 mA)
C Hi Current high Calibrate high current input (e.g. 20 mA)
v CAL
Voltage
calibration Calibrate voltage input
v Lo Voltage low
Calibrate low voltage input (e.g. 0 V)
v Hi
Voltage high Calibrate high voltage input (e.g. 10 V)
Copy Copy Enter copy function
Send
Send Send meter settings to another meter
Done
Done Copy function completed
Diag Diagnostics Display parameter settings