YOKOGAWA WT200, Руководство пользователя

Страница: 177 / 242

14-15
IM 253421-01E
Communication Commands 2 (System of Commands Complying to the IEEE 488.2-1987 Standard)
14
COMMunicate:REMote
Function Sets remote (ON) or local mode (OFF).
Syntax COMMunicate:REMote {<Boolean>}
COMMunicate:REMote?
Example COMMUNICATE:REMOTE ON
COMMUNICATE:REMOTE?
→
:COMMUNICATE:
REMOTE 1
Description This command is dedicated to the RS-232-C
interface. An interface message is available for
the GP-IB interface.
COMMunicate:STATus?
Function Queries the status of a specified circuit.
Syntax COMMunicate:STATus?
Example COMMUNICATE:STATUS?
→
:COMMUNICATE:
STATUS 0
Description The status condition for each bit is as follows.
bit
GP-IB RS-232-C
0 permanent Parity error
comm. error
1 always 0 framing error
2 always 0 break character
occurrence
3 and up always 0 always 0
When a status occurs which results in changing
of the bits, reading it will clear the error.
COMMunicate?
Function Queries all the communication settings.
S y n t a x COMMunicate?
Example COMMUNICATE?
→
:COMMUNICATE:HEADER 1;
VERBOSE 1
COMMunicate:HEADer
F u n c t i o n Determines whether a header is to be
added (for example:
"CONFIGURE:VOLTAGE:RANGE 150.0E+00"”) or
not (for example:150.0E+00) when sending
a response to a query, or queries the
current setting.
S y n t a x COMMunicate:HEADer {<Boolean>}
COMMunicate:HEADer?
Example COMMUNICATE:HEADER ON
COMMUNICATE:HEADER?
→
:COMMUNICATE:
HEADER 1
COMMunicate:LOCKout
Function Sets local lockout ON or OFF.
S y n t a x COMMunicate:LOCKout {<Boolean>}
COMMunicate:LOCKout?
Example COMMUNICATE:LOCKOUT ON
COMMUNICATE:LOCKOUT?
→
:COMMUNICATE:
LOCKOUT 1
Description This command is dedicated to the RS-232-C
interface. An interface message is available for
the GP-IB interface.
14.3 Commands
14.3.3 COMMunicate Group
The commands in the COMMunicate group are used to make settings relating to, and inquires about
communications. There is no front panel key for this function.
:COMMunicate : HEADer <Space> OFF
ON
<NRf>
?
VERBose <Space> OFF
ON
<NRf>
?
WAIT <Space> <Register>
?
REMote <Space> OFF
ON
<NRf>
?
LOCKout <Space> OFF
ON
<NRf>
?
STATus ?
?
;