Setup Parameters
Control Function Setting
Menu
Symbol
Name
Display level
Setting range
Initial value
User setting
CTL
CNT
Control type
EASY
PID: PID control
ONOF: ON/OFF control (1 point of hysteresis)
ONOF2: ON/OFF control (2 points of hysteresis)
2P2L: Two-position two-level control
H/C: Heating/cooling control
Standard type: PID
Heating/cooling type: H/C
ALG
PID control mode
PRO
0: Standard PID control mode
1: Fixed-point control mode
0
SPGR.
Number of SP groups
STD
1 to 4
4
ALNO.
Number of alarms
PRO
1 to 4
4
ZON
Zone PID selection
STD
0: SP group number selection 1
1: Zone PID selection (selection by PV)
2: Zone PID selection (selection by target SP)
3: SP group number selection 2
4: Zone PID selection (selection by SP)
0
PIDG.
Number of PID groups
STD
1 to 4
4
PV Input Setting
Menu
Symbol
Name
Display level
Setting range
Initial value
User setting
PV
IN
PV input type
EASY
OFF: Disable
K1: -270.0 to 1370.0 (°C) / -450.0 to 2500.0 (°F)
K2: -270.0 to 1000.0 (°C) / -450.0 to 2300.0 (°F)
K3: -200.0 to 500.0 (°C) / -200.0 to 1000.0 (°F)
J: -200.0 to 1200.0 (°C) / -300.0 to 2300.0 (°F)
T1: -270.0 to 400.0 (°C) / -450.0 to 750.0 (°F)
T2: 0.0 to 400.0 (°C) / -200.0 to 750.0 (°F)
B: 0.0 to 1800.0 (°C) / 32 to 3300 (°F)
S: 0.0 to 1700.0 (°C) / 32 to 3100 (°F)
R: 0.0 to 1700.0 (°C) / 32 to 3100 (°F)
N: -200.0 to 1300.0 (°C) / -300.0 to 2400.0 (°F)
E: -270.0 to 1000.0 (°C) / -450.0 to 1800.0 (°F)
L: -200.0 to 900.0 (°C) / -300.0 to 1600.0 (°F)
U1: -200.0 to 400.0 (°C) / -300.0 to 750.0 (°F)
U2: 0.0 to 400.0 (°C) / -200.0 to 1000.0 (°F)
W: 0.0 to 2300.0 (°C) / 32 to 4200 (°F)
PL2: 0.0 to 1390.0 (°C) / 32.0 to 2500.0 (°F)
P2040: 0.0 to 1900.0 (°C) / 32 to 3400 (°F)
WRE: 0.0 to 2000.0 (°C) / 32 to 3600 (°F)
JPT1: -200.0 to 500.0 (°C) / -300.0 to 1000.0 (°F)
JPT2: -150.00 to 150.00 (°C) / -200.0 to 300.0 (°F)
PT1: -200.0 to 850.0 (°C) / -300.0 to 1560.0 (°F)
PT2: -200.0 to 500.0 (°C) / -300.0 to 1000.0 (°F)
PT3: -150.00 to 150.00 (°C) / -200.0 to 300.0 (°F)
0.4-2V: 0.400 to 2.000 V
1-5V: 1.000 to 5.000 V
4-20: 4.00 to 20.00 mA
0-2V: 0.000 to 2.000 V
0-10V: 0.00 to 10.00 V
0-20: 0.00 to 20.00 mA
-1020: -10.00 to 20.00 mV
0-100: 0.0 to 100.0 mV
Note: W: W-5% Re/W-26% Re (Hoskins Mfg. Co.), ASTM E988
WRE: W97Re3-W75Re25
OFF
UNIT
PV input unit
EASY
-: No unit
C: Degree Celsius
-: No unit
--: No unit
---: No unit
F: Degree Fahrenheit
C
RH
Maximum value of PV input range
EASY
Depends on the input type
RL
Minimum value of PV input range
EASY
Depends on the input type
SDP
PV input scale decimal point position
EASY
0: No decimal place
1: One decimal place
2: Two decimal places
3: Three decimal places
4: Four decimal places
Depends on the input type
SH
Maximum value of PV input scale
EASY
Depends on the input type
SL
Minimum value of PV input scale
EASY
Depends on the input type
BSL
PV input burnout action
STD
OFF: Disable
UP: Upscale
DOWN: Downscale
Depends on the input type
RJC
PV input reference junction compensation
PRO
OFF: RJC OFF
ON: RJC ON
ON
ERJC
PV input external RJC setpoint
PRO
-10.0 to 60.0 (°C)
0.0
A.BS
PV analog input bias
STD
-100.0 to 100.0% of PV input range span (EUS)
0.0 % of PV input range
span
A.FL
PV analog input filter
STD
OFF, 1 to 120 s
OFF
Input Range/SP Limiter Setting
Menu
Symbol
Name
Display level
Setting range
Initial value
User setting
MPV
P.UNI
Control PV input unit
STD
-: No unit
C: Degree Celsius
-: No unit
--: No unit
---: No unit
F: Degree Fahrenheit
Same as PV input unit
P.DP
Control PV input decimal point position
STD
0: No decimal place
1: One decimal place
2: Two decimal places
3: Three decimal places
4: Four decimal places
Depends on the input type
P.RH
Maximum value of control PV input range
STD
Depends on the input type
P.RL
Minimum value of control PV input range
STD
Depends on the input type
SPH
SP high limit
STD
100.0 % of PV input range
SPL
SP low limit
STD
0.0 % of PV input range
-19999 to 30000, (SL<SH), | SH - SL |
≤
30000
-19999 to 30000, (P.RL<P.RH), | P.RH - P.RL |
≤
30000
0.0 to 100.0% of PV input range (EU), (SPL<SPH)
Depends on the input type.
- For temperature input -
Set the temperature range that is actually controlled. (RL<RH)
- For voltage / current input -
Set the range of a voltage / current signal that is applied.
The scale across which the voltage / current signal is actually controlled should
be set using the maximum value of input scale (SH) and minimum value of
input scale (SL).
(Input is always 0% when RL = RH.)
Page 13 / 18
