Brief Description of Parameter Map
The control prevents unintentional change of the function.
The parameter display level is just a function to hide the display so the set function works.
Changing of parameter display level
The parameters to be displayed can be controlled by changing the setting value for setup parameter LEVL.
Setting value
EASY
EASY
Symbol
Corresponding parameters are displayedin all modes.
STD
Symbol
Symbol
PRO
PRO
Symbol
Symbol
Symbol
Corresponding parameters are displayed only in Professional setting mode.
Meaning of Parameter Symbol and Numeric Value
Numeric Value
Symbol
↑
↑
Group
Parameter symbol
Group E1: indicates the parameter in E1-terminal area
E3: indicates the parameter in E3-terminal area
E4: indicates the parameter in E4-terminal area
1 to 4, R: indicate the group numbers
Display may be controlled according to the setting value of the setup parameter and operation status.
Parameter Display Transition and Setup Operation
To move to the Operation Parameter Setting Display
To move to the Setup Parameter Setting Display
To move to the Operation Display
<Operation for Setting>
Parameter Display Level
If you cannot remember how to carry out an operation during setting, press the DISPLAY key or DISP key once. This
brings you to the display (Operation Display) that appears at power-on.
Corresponding parameters are displayed only in Standard setting mode and Professional setting mode.
Parameter display level indicators "EASY" and "PRO" are unlit in Standard setting mode.
The parameter display level is a function to control the parameters to be displayed. The factory setting is
LEVL=STD.
To select the parameter setting displayed as the initial value, press the Down arrow key to move to the next parameter.
To change and set the parameter setting, press the SET/ENTER key to start the setpoint blinking. The blinking state allows
you to make changes (setting mode). Use the Up/Down/Left/Right arrow keys to change the setpoint. Press the
SET/ENTER key to register the setting.
＋
Press the key
for 3 seconds.
/
Press the key
for 3 seconds.
/
Page 5 / 18
