YOKOGAWA TM20 Скачать руководство пользователя страница 71

Страница: 71 / 111

IM 54011-E

5 Confirm, Modify, Clear, or Delete the Data with the Main Unit

Press the [FUNC], [2], and [4] keys, in
order.

The “Log Del” screen appears on the LCD.

F24

L o g D e l

Press the [SET] key.

Convey

1 2

Press the [

▼

] key repeatedly until the

log to be deleted is displayed on the
screen.

Accept

Press the [SET] key.

The confirmation dialog box appears.

Delete?

Ye s 1 / N o 0

Press the [1] key.

The selected log and its associated measurement data
is deleted.
Press the [ESC] key repeatedly to return to the Home
screen.

-End of procedure-

5.9

Batch-clearing the mea-
surement data associated
with both the tag and log

This section explains the procedure used to
clear all the measurement data associated
with both the tag and log. However, note
that the setup data will not be cleared.

Home screen

18:54:27

222

25.9

Press the [FUNC], [4], and [4] keys, in
order.

The “All File” screen appears on the LCD.

F44

A l l

F i l e

Press the [SET] key.

DataClr?

Ye s 1 / N o 0

Press the [1] key.

All the measurement data recorded in the main unit
is cleared.
Press the [ESC] key repeatedly to return to the Home
screen.

-End of procedure-

Содержание TM20
















































































































Результаты поиска

Содержание TM20

Отзывы:

YOKOGAWA TM20, Руководство пользователя, Страница: 71 / 111

Результаты поиска

Содержание TM20

Отзывы: