YOKOGAWA TM20 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 111

YOKOGAWA TM20 Скачать руководство пользователя страница 5

iv

iv

IM 54011-E

●

Batteries

Caution

• Be sure to remove the batteries if the product will not be used for a long period.

Otherwise, the battery liquid may leak and damage the circuitry, resulting in a mal-
function.

• Whenever replacing batteries, be sure to replace both batteries with new ones. Chang-

ing only one battery may result in the charge current from the new battery flowing to
the old one.

■

Disclaimer of guarantee

• Yokogawa M&C Corporation does not guarantee this product in any way, except as set

forth in the terms and conditions of the certificate.

• Yokogawa M&C Corporation shall not be liable for any consequent or inconsequent dam-

ages to the customer or a third party arising from the use of the product due to any defect in
materials or workmanship beyond the control of Yokogawa M&C Corporation.

■

Figures in this manual

For ease of understanding, figures and illustrations in this manual may not precisely depict
the actual product or software.

■

Care of product

• If there is a need to clean the casing, wipe the surfaces with a wrung wet cloth.
• To remove tough stains, use a cloth dampened with a diluted neutral detergent. Do not use

any solvent, other detergent, or chemical other than neutral detergents to prevent the prod-
uct from being damaged.

• Keep the connectors and other conductive parts dry to prevent the product from being

damaged.

• When using the product in a place where water may splash the product, use the waterproof

case that comes with the product to prevent the product from becoming dirty and enhance
the product’s water resistance.

■

Maintenance service

When the product needs to be serviced or repaired, contact the dealer from which you pur-
chased the product.

◆

Trademarks

• Microsoft, Windows, Windows 95, Windows 98, Windows NT, and Excel are trademarks

or registered trademarks of Microsoft Corporation, United States.

• Other company and product names appearing in this document are trademarks or registered

trademarks of the respective holders.

«
...
3
4
5
6
7
...
»

Содержание TM20
















































































































Отзывы:

Нет отзывов