3 Setting Up with the Personal Computer
35
35
IM 54011-E
Preparing f
o
r
Measurement
■
Setting operator names
●
Make settings with a person table
A person table is a list of the set operator names. It is possible at any time to select whichever
settings from a person table you want.
1.
From the File menu, choose Person Table, then New.
A document window for setting operator names, entitled “Person Table - New” as shown below, then opens.
Person Table window
2.
In the Abbr. Name column, enter operator names of up to eight characters.
Abbreviated names stand for shortened operator names of up to 8 alphanumeric characters that can be displayed on
the TM20 screen.
3.
In the Full Name column, enter the longer, more descriptive names of the operator.
Full names have no limitation in length. If you select this table as the reference person table, Thermo-Collector will
replace the abbreviated names with the corresponding full names based on this table when receiving measured data
from a TM20.
4.
Add and insert rows as necessary.
You can insert and add rows by either of the following ways:
•
Using a shortcut menu that opens by a right-click
•
Using keystrokes of CTRL+I and CTRL+R
5.
Click the Abbr. name cell of the next row and set.
Enter the abbreviated and full names again.
6.
Save the table.
From the File menu, choose Person Table then Save As to save the table.
- End of procedure -