YOKOGAWA TM20 Скачать руководство пользователя страница 4

Страница: 4 / 111

iii

IM 54011-E

TIP

Provides a tip or information supplementary to the main text.

See Also

Provides one or more references to related topics in this document.

■

Precautions for handling of components

Be sure to observe the following precautions to avoid injury and loss of life of personnel, and
damage to the equipment used.

●

Probe

Warning

Do not point the tip of the needle themo probe at a person. It is very sharp and may
cause injury.

Caution

• Do not touch the stylus (metal part) of a probe that has just been used to measure a

high temperature as it may cause a burn.

• Make sure that the potential differences between probes do not exceed 1 V.

• Do not use a worn or damaged probe, which may be incapable of correct tempera-

ture measurements.

• Before removing a probe from the TM20, pull the probe away from the object mea-

sured.

• When using a probe for liquids, such as a needle probe, insert it into the liquid to be

measured by approximately half the dimension of the probe’s stylus (metal part).
Inserting it too deeply may cause a burn due to heat transfer to the probe grip as
well as cause damage to the probe itself.

• The probe grip and the cable connected from the TM20 must be maintained at a

temperature between –20

C and 50

C. Unlike the stylus of a probe, these parts have

a low resistance to heat.

• When sending data in real-time, use an ungrounded probe.

Содержание TM20
















































































































Результаты поиска

Содержание TM20

Отзывы:

YOKOGAWA TM20, Руководство пользователя, Страница: 4 / 111

Результаты поиска

Содержание TM20

Отзывы: