YOKOGAWA TM20 Скачать руководство пользователя страница 31

Страница: 31 / 111

IM 54011-E

3 Setting Up with the Personal Computer

“Measured Datas” submenu

Save As
Saves the measurement data in a text format.

Close
Closes the measurement data file.

Transfer
Transfers the measurement data file to Excel.

Print
Outputs the measurement data to the printer.

“Tag/Log Table” submenu

New
Opens a new blank tag/log table.

Open
Opens an existing tag/log table.

Save
Saves the changes to the open tag/log table.

Select Reference Table
Selects the reference tag/log table. Based on
this reference table, abbreviated names will be
replaced with the respective full names.

Clear Reference Table
Clears the selection of reference tag/log table.

Forward to Tag/Log Setup File
Forwards the settings in the open tag/log table to
the setup file.

Save As
Saves the open tag/log table under a new
filename.

“Person Table” submenu

New
Opens a new blank person table (a list of
operators).

Open
Opens an existing person table.

Save
Saves the changes to the open person table.

Select Reference Table
Selects a person table. Based on this person
table, abbreviated person names will be
replaced with the respective full names.

Clear Reference Table
Clears the selection of reference person table.

Forward to Person Setup File
Forwards the settings in the open person table to
the setup file.

Save As
Saves the open person table under a new
filename.

Содержание TM20
















































































































Результаты поиска

Содержание TM20

Отзывы:

YOKOGAWA TM20, Руководство пользователя, Страница: 31 / 111

Результаты поиска

Содержание TM20

Отзывы: