YOKOGAWA TM20 Скачать руководство пользователя страница 22

Страница: 22 / 111

3 Setting Up with the Personal Computer

IM 54011-E

Preparing f

Measurement

After inserting the second floppy diskette (Setup Disk #2), click on the [OK] button.

Precautions to be observed prior to installation appears.

Click on the [OK] button.

The installer of the application program is initiated and the “Thermo Collector Setup” screen is displayed.

Click on the [Start Setup] button.

A screen prompting the insertion of the third floppy diskette (Setup Disk #3) appears.

After inserting the third floppy diskette (Setup Disk #3), click on the [OK] button.

[TIP]

Do as follows to change the application install destination.

1.Click on the [Change Directory] button.
2.Select a installation destination folder.
3.Click on the [OK] button.

After installation has been completed, the following confirmation window is displayed.

[TIP]

If the another window is displayed, set the new group name and click [Continue] button. (Select the
name from “group list” when you already have the name you want to use, and click [Continue] button.

Click on the [OK] button.

-End of procedure-

Содержание TM20
















































































































Результаты поиска

Содержание TM20

Отзывы:

YOKOGAWA TM20, Руководство пользователя, Страница: 22 / 111

Результаты поиска

Содержание TM20

Отзывы: