YOKOGAWA TA220, Руководство пользователя, Страница: 78 / 178

7-12
IM 704610-01E
7.3 Outputting Other Signals
Equalized RF signal monitor output circuit
OUT
EQUALIZED
(50 Ω )
–5 V
+5 V
50 Ω
(Equalized RF
signal monitor
output terminal)
Outputting Data Signals (Binarized Signals)
You can output the data signal obtained through the binarization of the RF signal from
the data signal output terminal (SLICED RF OUT) on the rear panel at TTL levels.
Item Description
Connector type BNC
Output impedance 50 Ω (typical value*)
Output level Approximately ± 0.4 V if the monitor device receives the signal at an
impedance of 50 Ω .
* The typical value is a representative or standard value. It is not strictly guaranteed.
(data signal
output terminal)
Data signal output circuit
OUT
SLICED RF
–5 V
+5 V
50 Ω
( 0.4V)
Outputting the Clock Signal
You can output the clock signal regenerated by the PLL circuit from the clock signal
output terminal (CLOCK OUT) on the rear panel at TTL levels.
Item Description
Connector type BNC
Output impedance 50 Ω (typical value*)
Output level Approximately ± 0.4 V if the monitor device receives the signal at an
impedance of 50
Ω
.
* The typical value is a representative or standard value. It is not strictly guaranteed.
(clock signal
output terminal)
Clock signal output circuit
OUT
CLOCK
–5 V
+5 V
50 Ω
( 0.4 V)